EDID binary labelled Samsung LTN156AT190, probably the LTN156AT19 panel with a revision digit attached, though the name does not separate them. At 256 bytes it contains the base EDID block and one extension block. The data defines manufacturer ID, native resolution and panel timings read over the DDC lines. Decode it to confirm the panel string, then write it to the panel's EEPROM with an I2C programmer if it matches. Compare the sticker on your panel, and back up the original content before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →