Display identification dump for the Samsung LTN156AT24 panel with the C01 revision suffix. The 256-byte binary carries a base EDID block and an extension block that the graphics driver reads to set native mode and timings. Writing it back to the panel EEPROM fixes problems such as missing native resolution, no backlight control or an unknown monitor in the OS. Open it in a hex editor or an EDID viewer to check the checksum and panel string. Make sure the panel model and suffix match, and back up the existing chip first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →