Data for a Samsung LTN156AT37 panel, revision L02, but at 4.00 KB the file is much larger than a normal 128- or 256-byte EDID block. It may be a padded read or a full dump of a bigger EEPROM or timing-controller memory, so inspect it in a hex editor to locate the EDID header and see what else it holds. An image will only fit a chip of matching capacity, so confirm the memory part on the panel before programming. Always save the original contents first and match the L02 label.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →