EDID data for the Samsung LTN170X2 panel, revision L02, saved as a 256-byte binary containing a base and an extension block. The graphics driver and video BIOS read this data over DDC to choose resolution and timing. Corruption leads to symptoms like a black screen, a generic display or no native mode. Repair technicians restore it by programming the panel's small EEPROM. Other suffixes of this panel exist, such as L03, so check the exact one on the sticker. Back up the chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →