SAMSUNG LTN170X2-L03 (DELL FW758)

BIOS .bin 256 B Shared

EDID dump for a Samsung LTN170X2-L03 panel, with Dell FW758 noted in the name, which looks like the Dell part number for the panel. The file is 256 bytes: a base EDID block plus an extension block. Dell systems may read vendor data from the EDID, so an OEM-matched image helps restore proper detection and native resolution. Program it to the panel's I2C EEPROM with a programmer or EDID utility. Check the panel label and the Dell part reference, and keep a copy of the original data.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.

All sources (3)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files