Second copy of a Samsung LTN173KT01 panel EDID, 256 bytes, with no revision marking beyond the (2) in the name. Having two dumps of one panel model lets you compare bytes and spot corruption, since a valid image starts with the standard 00 FF FF FF FF FF FF 00 header and ends each block with a correct checksum. Write it with an I2C EEPROM programmer when the display is not recognised or shows no picture. Check the label on the panel against the model before programming and save the existing data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →