EDID binary for the Samsung LTN173KT02-801, a 17.3 inch laptop display panel, 256 bytes in size. The file contains the display identification block with native resolution, timing and manufacturer data the system reads over the DDC lines. Reflashing it can fix a panel that is not detected, shows no picture or reports the wrong mode after EEPROM damage. Make sure the -801 suffix on the panel sticker matches, read and store the current content first, then program it with a suitable EDID tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →