Second copy of an EDID image for the Samsung LTN184HT03 panel with the 001 suffix, marked (2) in the name. It is 256 bytes, holding the base EDID block and one extension block. Comparing it with the first copy in a hex editor shows whether the serial number, date or other fields differ. Technicians write such data to the panel's small serial EEPROM to restore correct identification and timings. Confirm that the panel sticker matches, save the existing EEPROM contents, and check the checksum before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →