Samsung LTN184KT01 panel EDID image, revision code J01 as stated in the name, 256 bytes in size. EDID describes the panel's native resolution, timings, manufacturer ID and serial. It normally lives in a 24C02-class serial EEPROM read over I2C/DDC. A repair tech uses a programmer such as a CH341A or an EDID utility to restore a damaged or blank chip after a panel swap. Check the sticker on the back of the panel for the exact model and suffix, and keep a backup of the original data before you flash this one.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →