Firmware archive for the Samsung NP300 series built on the Scala3-15/17 platform, apparently covering 15 and 17 inch variants, with CRV and revision 1.2 in the name. Scala is a Samsung platform designation, so match the code and revision on the motherboard before use. Extract the RAR to see whether it holds a BIOS image, EC firmware or both. Read and keep the original SPI contents with a programmer first, and make sure the dump size matches the installed flash chip, or it will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 22 Jan 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →