Firmware archive for the Samsung NP300E5C notebook on the SCALA3-15CRV board, with the name noting a 64bit tag, probably referring to the system or BIOS build it was taken with. The RAR is 2.42 MB and should contain a flash image for the board's SPI chip. It is useful when the laptop shows no image, loops on power-up or lost settings after a bad flash. Extract it, check the image size against the chip on your PCB, back up the original contents and then program it with an external SPI programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 5 Oct 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →