Raw BIOS image for the Samsung RF511 laptop, stored as a 2.00 MB ROM file. A 2 MB image matches a 16 Mbit SPI flash chip, so check the chip on the board has that capacity before programming it, since an image of the wrong size will not fit. Technicians write a file like this with a CH341A, RT809 or similar programmer to recover a laptop with corrupted firmware. Read and save the original chip contents first, and verify the write before reassembling.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @oficinacomputadores. Enginerys does not host this file.
How to open a .rom file
A BIOS image as shipped by the vendor (commonly AMI) — often the BIOS region only, without descriptor or ME.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →