Firmware dump from a Samsung UA32EH4000 LCD television, read from a W25Q64 SPI flash chip. The 8 MB size matches the 64 Mbit capacity of that Winbond part. Repair technicians write this kind of image back with a programmer to fix boot loops, logo hang or a dead main board. Confirm the mainboard number and panel combination on the set before flashing, since TV firmware is often panel-specific, and always save the original chip contents before erasing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →