Flash memory dump for the Sharp LC-40LE265M LCD television, stored as an 8.00 MB raw binary that corresponds to a 64 Mbit SPI chip. TV repairers use a dump like this to restore a set stuck in a boot loop, showing no picture or stuck on the logo, by rewriting the main board flash with a programmer. Read and keep the original chip contents first, since panel settings and keys can differ between units, and confirm the chip on the main board is 8 MB before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →