Firmware dump for the Sharp LC-40LE265M LED television, marked OK, which indicates it was checked and works. The 8 MB size fits a 64 Mbit SPI flash chip on the mainboard. It is used to recover a set that stays in standby, restarts in a loop or shows a corrupted logo, by writing the image with an external programmer. Confirm the chip type and board label match, keep a copy of the current contents, and verify the write before refitting the board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_bin_file. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →