BIOS image for a Shuttle HDT 3100VC, with the name pointing to a 25Q32 SPI flash chip, a 32 Mbit part that holds 4 MB. The dump is packed inside a RAR archive, so extract it before programming. Use a hardware programmer such as a CH341A to read and back up the existing chip, then compare the image size with the chip capacity before writing. Check the device model against the label on your unit before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 30 Mar 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →