SM BIOS 1.0.6.1120 3MB MD PRD RGN

BIOS .bin 2.31 MB Shared

Firmware image named SM_BIOS, build 1.0.6.1120, with 3MB, MD, PRD and RGN markers in the title and an actual size of 2.31 MB. Nothing in the name identifies the device or the board, so the series must be matched by other means, such as a read of the original chip. The RGN tag implies a single region intended to be merged into a larger image. Open it in a hex viewer to confirm its structure, back up the target flash completely and check that the version family suits your hardware before writing it with a programmer.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @sm_intel_repository. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files