Consumer Intel ME region 11.8.50.3477 for H-series chipsets at D/A stepping, taken from an existing flash dump as the EXTR tag indicates. At 1.75 MB it is smaller than the stock regions in this set, consistent with a trimmed, configured extract. It can serve as a reference or donor for identical hardware. Verify the board model and chipset match, check the size fits the ME area defined by the descriptor, and keep a backup before any write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @sm_intel_repository. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @sm_intel_repository | 3 Oct 2025 | Open file on RM Schematics |
| @sm_intel_repository | 3 Oct 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →