Consumer Intel ME firmware 11.8.60.3560 for H chipsets, DA stepping, production build of 1.75 MB marked EXTR, meaning it was extracted, typically from an update package, rather than supplied as a stock region. Such images are generally run through Intel Flash Image Tool to produce a correct ME region. Use it to repair a damaged consumer H ME; back up the SPI flash before any change and verify the descriptor region size matches the rebuilt output.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @sm_intel_repository. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @sm_intel_repository | 3 Oct 2025 | Open file on RM Schematics |
| @sm_intel_repository | 3 Oct 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →