Companion image to the green-mark file: RTS5452H Type-C PD firmware for the NB6510A RPL board, V4, for the controller marked red and labelled XZ2. Writing it to the wrong chip can leave a port unable to negotiate power, so confirm the mark and location on the PCB first. The roughly 53 KB archive is programmed into the controller flash with a standard programmer. Keep a backup of the original dump, and check that the board version printed on the PCB matches V4.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @sm_bios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @sm_bios | 18 Sept 2025 | Open file on RM Schematics |
| @smbiossupport | 18 Sept 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →