Firmware image for the Sony M870 notebook board MBX-214, revision 1.1, supplied as a 3.79 MB RAR archive and labelled tested OK. MBX codes are Sony's own internal motherboard numbering, printed on the PCB, so check that both the board code and revision match before use. Technicians use such a dump to bring back a laptop that will not POST after a bad update or chip failure, programming the SPI flash directly with a hardware programmer. Back up the existing chip contents first in case the board-specific data needs restoring.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 4 Feb 2024 | Open file on RM Schematics |
| @generalbios | 5 Feb 2024 | Open file on RM Schematics |
| @generalbios | 7 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
| @generalbios | 6 Mar 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →