Raw 1 MB binary firmware image for a Sony VAIO VPCW217JC netbook using the Sony MBX-219 motherboard. The size suggests a dump read from an 8 Mbit SPI flash, though the chip should be checked on the board itself. Technicians write such an image with a programmer like a CH341A or RT809 to revive a board that does not start after a bad flash. Confirm the MBX number on the PCB, read and keep the original chip contents first, and verify the written data after programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →