spi HP 840 G106050a3452701-mb-a01clen me ++

BIOS .bin 32.0 MB Shared

SPI flash dump for the HP EliteBook 840 G10 on board 6050A3452701 revision A01, with the Management Engine region cleaned. At 32 MB it corresponds to a 256 Mbit chip. The 6050A prefix belongs to Inventec numbering, so confirm the label on the PCB carries the same number. Use a hardware programmer to write it when the laptop has a corrupted BIOS or ME error, and save the existing chip first since it stores the serial number, product ID and other board-specific data.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSupport2006. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →