SR-4060HD V3.95 26102026 @MediaStarSupportS@satDL

BIOS .bin 3.13 MB Shared

V3.95 software image for the MediaStar SR-4060HD satellite receiver, dated 26.10.2026 in the name and sized 3.13 MB. Files of this kind are used either to update the box through the vendor upgrade utility or, when the unit is bricked, to write directly to the SPI flash with an external programmer. Before flashing, check that the receiver really is an SR-4060HD, as images for other MediaStar models are not interchangeable, and keep a backup of the original dump in case the result is unstable.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files