SR-4070HD V3.95 26102026 @MediaStarSupportS@satDL

BIOS .bin 3.13 MB Shared

Standard MediaStar SR-4070HD receiver firmware, version V3.95, with 26 October 2026 given as the build date. The binary is 3.13 MB and represents the flash contents used by this model. A technician can load it onto the memory chip to recover a receiver showing no picture, a stuck front display or a boot loop. Do not confuse it with the SR-4070HD-EXTREME image; confirm the model on the back label, and read out and archive the existing chip data before programming.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files