SR-5020HD V3.95 26102026 @MediaStarSupportS@satDL

BIOS .bin 3.13 MB Shared

MediaStar SR-5020HD receiver software, version V3.95, dated 26.10.2026 according to the file name, supplied as a 3.13 MB raw binary. A dump like this suits restoring a set-top box that no longer boots, whether loaded through the service port tool or written directly to the SPI flash with a programmer such as a CH341A. Images for neighbouring MediaStar models look similar, so verify the model printed on the unit matches SR-5020HD, and back up the existing flash before overwriting anything.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files