SR-5090HD-EXTREME V3.95 26102026 @MediaStarSupportS@satDL

BIOS .bin 3.13 MB Shared

Satellite receiver firmware for the SR-5090HD Extreme, version 3.95, about 3.1 MB, with a date stamp in the name. Repair technicians apply such files to update the software or to revive a receiver that freezes at startup, normally via USB or a loader program. Confirm the exact model and hardware revision before loading, because images for other units in the same range can render the receiver unbootable, requiring recovery by reprogramming the flash chip directly.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files