SR-6969HD VEGA V3.95 26102026 @MediaStarSupportS@satDL

BIOS .bin 3.13 MB Shared

Version 3.95 software image for the SR-6969HD Vega satellite receiver, around 3.1 MB, with the build date included in the name. It is used to update the receiver or restore it after a failed upgrade, usually by USB or a serial loader. Make sure the unit is the Vega variant and not the Extreme, since the files are not interchangeable. Stable power during the update matters, and a full chip-level recovery may need an SPI programmer if booting fails.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files