Firmware dump for the Star X 2121 Full HD receiver taken from an EN25Q64 flash chip, a 64 Mbit (8 MB) SPI memory consistent with the 8.00 MB size. Being a raw bin image, it is flashed with a programmer such as a CH341A rather than through a menu update. It helps restore receivers that freeze on startup or were bricked by corrupted firmware. Other 2121 versions use 4 MB chips, so confirm the chip marking, read and back up the existing contents, and match the model before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →