Full flash dump for the Star-X 31000HD receiver, read from an EN25Q64 chip, a 64 Mbit (8 MB) SPI flash that matches the 8.00 MB file size. A raw bin image of this kind is written directly with an SPI programmer such as a CH341A, on-board with a clip or after desoldering the chip. It is typically used to revive a receiver that will not boot after corruption. Confirm the chip marking and model, and save the original contents before erasing so you can roll back if needed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →