Encrypted firmware for the Star-X 98 receiver, variant 3510A, version V1.09.15394 dated 5 January 2016. The encrypt label suggests the update is meant for the receiver's built-in upgrade path rather than raw programming. At 2.92 MB it is not a full flash dump either. Check that your unit is the 3510A variant and running compatible software before updating, and do not cut the power while the upgrade runs. A receiver that no longer boots usually needs a full chip image written with a programmer instead.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @tamirkaran_chanel | 16 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →