Software for the Star-X 98 FHD receiver, version V1.09.13726 with a build date of 26 February 2015. At 2.58 MB it does not match any standard flash chip size, so it is more likely an upgrade file loaded through USB or a serial loader than a full chip dump. Check the receiver's menu for the current version and confirm the exact model before updating. If the unit no longer boots, you will need a complete SPI dump rather than this file, written with a programmer after saving the original chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →