Firmware image for the Star X 99 receiver, tagged in the name as the USB version. No flash chip is stated, but the 4.00 MB size points to a 32 Mbit SPI memory. Such a dump is written with an external programmer to recover a receiver that no longer boots or responds to the front panel. Because the X 99 appears in several variants, compare the hardware with the USB designation before relying on it, and always read and store the current chip contents first so the original can be restored.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →