Star-X Super 98 receiver firmware, version 2.07 dated 13.09.2017, in raw .bin form at 3.13 MB. No flash memory type or board revision appears in the name, so identify both on the actual unit first. Such an image is typically used to recover a receiver stuck on its boot screen or to restore software after a failed update, using either the USB upgrade function or an SPI programmer. Keep a backup of the original chip and verify that the image size fits the installed flash before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @tamirkaran_chanel | 16 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →