Star X X2323 Full HD receiver firmware read from an EN25Q32A flash chip. The 4.00 MB image fills a 32 Mbit memory, which agrees with the chip named in the file. Writing this full dump with a SPI programmer is the usual way to revive a receiver when the loader is damaged and updates over USB or satellite no longer work. Before programming, save the original chip, check the flash marking on the board and confirm the model, since different receivers can share similar housings.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →