Firmware dump for the Star X X2727 receiver, stored on a W25Q128 flash chip according to the name. The 16.0 MB size equals 128 Mbit, the full capacity of that part, so it will not fit a smaller 64 Mbit chip. Technicians write this image with a SPI programmer to recover a receiver that fails to boot or lost its software. Other X2727 versions use different flash sizes, so check the chip on your board, back up its current contents, and verify the data after programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →