Firmware backup for the Star X2121 receiver in its HDMI version, built around an SPHE1002AS processor according to the name. The flash chip is listed as N25F32, and the 4.00 MB image corresponds to 32 Mbit capacity. Technicians flash this dump with an external SPI programmer to recover a box that stays on standby, freezes on the logo or was corrupted by a wrong update. Make sure the processor marking and HDMI board match yours, and save the original chip contents before erasing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →