Star X31000 Laser Full HD receiver firmware, stored as a full flash read from a W25Q64 chip. At 8.00 MB the file fills a 64 Mbit memory completely, so it will not fit a smaller 32 Mbit part. Repairers use such images to recover receivers that hang on startup, show no picture or lost their software after a power cut during update. Use a SPI programmer with a clip or remove the chip, save the old dump first, and verify that the Laser model label matches the unit on the bench.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →