StarSat SR-2100 HD V1.83.15595 20160127

BIOS .bin 2.98 MB Shared

StarSat SR-2100 HD receiver software, version 1.83 build 15595, dated 27 January 2016, in a 2.98 MB .bin file. It is useful for reinstalling or updating software on this model when the unit hangs, reboots or misbehaves after bad software. Load it with the receiver's USB or serial upgrade procedure, or program the flash chip directly on a dead unit. Check that the box really is an SR-2100 HD, since similar StarSat models use different images, and keep a copy of the original firmware before proceeding.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →