BIOS dump of 16.0 MB for a board identified as STREEP with Inventec number 6050A2851001, revision A01, marked in the name as fully working. The 6050A... pattern is Inventec's PCB numbering, widely used on HP notebooks. The raw BIN is written directly to the SPI flash with a programmer to recover a board with corrupt firmware. Confirm the flash chip is 16 MB, make a backup of the original contents including any serial and license data, and verify the board number matches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @skclappybios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →