A 4 MB binary firmware image for a SuperHD 1515 combo receiver, a satellite and terrestrial set-top box. The size suits a 32 Mbit SPI flash, typical for such receivers. It is used to revive a box stuck on boot or showing a blank display by writing it directly to the flash with a programmer or via the receiver loader. Check the main board marking and chip type before writing, and read out the existing chip first, since similar-looking boxes can use different hardware and incompatible software.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →