Firmware dump for a Supra SLED32 television built on the TP.VST59S.PB813 mainboard, configured for a 1366x768 panel resolution. The 4 MB raw binary is meant to be written straight to the board's SPI flash with a programmer such as a CH341A. Universal TV boards of this type rely on the firmware matching the panel, so confirm the panel resolution and the board marking before flashing. Read and save the original chip contents first so the set can be restored if the image does not suit it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →