Main board dump for the Supra STV-LC2610W LCD TV with the JUG7.820.752-1 board. The archive is only about 185 KB, consistent with a small serial flash image. The panel is not identified in the name, so confirm it against the original before writing. Technicians reflash the chip with an SPI programmer to cure startup failures, loops or a wrong picture. Note that this TV model also appears on other JUG7 boards, so the number printed on your PCB must match exactly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 3 Dec 2022 | Open file on RM Schematics |
| @hashmielecom | 9 Dec 2022 | Open file on RM Schematics |
| @led_software | 19 May 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →