Firmware for the Supra STV-LC3235WL LCD TV with a JUG7.820.829-1 main board and an ECG315B1 panel. Supplied as a 2.75 MB RAR, it should contain a dump of the board flash memory. Such files are used to restore sets that hang on startup, show no image or lost their configuration after a power fault. Verify that the board marking printed on the PCB and the panel code match, read out the original chip before erasing, and check the image size against the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 3 Dec 2022 | Open file on RM Schematics |
| @hashmielecom | 9 Dec 2022 | Open file on RM Schematics |
| @led_software | 19 May 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →