Firmware dump for the Microsoft Surface Pro 4, model 1724, Core i7 with 8 GB RAM, board part X911788-009, labelled as tested by FST Fix. The binary is 16 MB, matching a 128 Mbit SPI flash chip. Make sure the board part number and memory configuration match your unit, as Surface boards are variant specific. The image is written directly to the flash with an SPI programmer when the tablet does not boot. Read and archive the original contents before erasing the chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →