Firmware image for a 1X1 receiver in its CXT+ variant, labelled SW-1, stored as a 3.58 MB raw binary. CXT+ marks a distinct software edition, separate from the plain CXT and Super builds, and the name gives no version or date. Repair use is software recovery on units that freeze, reboot in a loop or show no picture after a failed update. Write it with a loader utility or an external programmer on the flash chip, and only after a full backup. Confirm that the hardware matches the CXT+ edition before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →