Receiver software for the 1X1 model, Super edition, in a 3.58 MB binary tagged SW-1. Apart from the model and edition, the name provides no firmware version or release date. Technicians use such dumps to bring dead or boot-looping receivers back to life, either with the serial or USB upgrade tool or by direct flash programming. The CXT and CXT+ files share the same size, so mixing up editions is easy. Confirm which edition the box needs, then back up the existing chip before writing this one.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @tamirkaran_chanel | 16 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →