StarMax A100 satellite receiver firmware image, labelled SW-1 in the name, supplied as a raw 5.27 MB binary. No version number, build date or hardware revision is stated, so confirm the exact receiver model and main board before use. Such images are typically used to recover a receiver stuck on boot or with corrupted software, either through the loader over USB or serial, or by writing the flash chip directly with a programmer. Read and save the existing flash contents first, and check that the chip capacity matches the image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →