Firmware dump for the X100 receiver in its ALFA edition, carrying the SW-1 tag, 3.62 MB raw binary. The name identifies only the model and edition, with no version or date details. It serves to recover receivers with corrupted software, frozen boot screens or failed upgrades, written through the maker's loader or with an SPI or parallel flash programmer. The X100 Super file is the same size but is a different edition. Check which edition fits the hardware, and read and save the original chip contents before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @tamirkaran_chanel | 16 Dec 2020 | Open file on RM Schematics |
| @tamirkaran_chanel | 16 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →