X100 Super satellite receiver software image, marked SW-1, delivered as a 3.62 MB .bin file. The file name carries only the model and edition, with no version or date, so compatibility should be confirmed against the receiver's main board and flash chip. Images like this are used to restore bricked set-top boxes stuck at boot, either through a serial or USB loader or by programming the flash memory off-board. Save a full read of the original chip before writing, because recovery depends on having a known-good copy.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @tamirkaran_chanel | 16 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →